HPE JL001A 4-Port 7U Network Switch
SKU#: JL001A
Availability: In Stock
Condition: New
Brand: HPE
Category: Networking
Sub Category: Network Switches
Weight: 45.19 lb
Standard ground shipping delivery: 5–8 business days.
$26,260.77
Product Overview
HPE JL001A is a managed Layer 3 Gigabit network switch with 4 x Gigabit RJ-45 ports and Power over Ethernet (PoE). It mounts in 7U of rack space, offers a switching capacity of 1920 Gbit/s and has a MAC address table of 64000 entries. HPE Aruba Networking 5412R 92GT PoE+ and 4 port SFP+ (No PSU) v3 zl2 Switch. Networking standards: IEEE 802.3.
Key features
- 4 x Gigabit Ethernet (10/100/1000) RJ-45 ports
- Power over Ethernet (PoE)
- Managed, Layer 3
- MAC address table: 64000 entries
- Switching capacity: 1920 Gbit/s
- Stackable
- 7U rack mount
- Standards: IEEE 802.3
Specifications
| Switch type | Managed |
|---|---|
| Web-based management | Yes |
| Quality of Service (QoS) support | Yes |
| Switch layer | L3 |
| Basic switching RJ-45 Ethernet ports quantity | 92 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Compatible memory cards | SD |
| I/O ports | 92 RJ-45 auto-sensing 10/100/1000 PoE+ ports 4 open 10 GbE SFP+ transceiver slots 8 open module slots Supports a maximum of 288 auto-sensing 10/100/1000 ports or 288 SFP ports or 96 SFP+ ports or 96 HPE Smart Rate Multi-Gigabit or 24 40 GbE ports, or a combination. |
| Auto-sensing | Yes |
| Networking standards | IEEE 802.3 |
| Full duplex | Yes |
| VLAN support | Yes |
| Routing entries | 10000 |
| IP routing | Yes |
| Auto MDI/MDI-X | Yes |
| 10G support | Yes |
| IGMP snooping | Yes |
| Throughput | 1142.8 Mpps |
| Latency (1 Gbps) | 2.8 s |
| Latency (10 Gbps) | 1.8 s |
| MAC address table | 64000 entries |
| Switching capacity | 1920 Gbit/s |
| Jumbo frames support | Yes |
| SSH/SSL support | Yes |
| Access Control List (ACL) | Yes |
| Form factor | 7U |
| Product colour | Metallic |
| Stackable | Yes |
| Rack mounting | Yes |
| Processor frequency | 1200 MHz |
| Noise level | 49 dB |
| Memory type | DDR3-SDRAM |
| Internal memory | 4096 MB |
| Flash memory | 16 MB |
| Built-in processor | Yes |
| Power supply included | No |
| AC input voltage | 200 - 240 V |
| AC input frequency | 50/60 Hz |
| Power supply note | 4 power supply slots 2 minimum power supplies required (ordered separately) |
| Power over Ethernet (PoE) | Yes |
| Latency | 1000 Mb Latency: < 2.8 s; 10 Gbps Latency: < 1.8 s; 40 Gbps Latency: < 1.5 s |
| Performance management | HPE Aruba Networking Management Software HPE Aruba Networking Central HPE Intelligent Management Center Basic Software Platform (IMC) Command-line interface Web browser Configuration menu Out-of-band management (RJ-45 Ethernet) Out-of-band management (serial RS-232C or micro USB) SNMP manager |
| Memory and processor | Depend on the model: Dual Arm Cortex A9 at 1 GHz; Packet buffer size: 13.5 MB internal Arm 11 at 450 MHz; Packet buffer size: 18 MB internal. Dual Arm Cortex A9 at 1; Packet buffer size: 13.5 MB internal Arm 11 at 550 MHz; Packet buffer size: 18 MB internal. Dual Arm Cortex A9 at 1 GHz; Packet buffer size: 13.5 MB internal Freescale P2020 dual core at 1.2 GHz, 16 MB flash, 1 GB SD Card, 4 GB DDR3 SODIMM. |
| Weight (imperial) | 45.19 lbs |
| Dimensions (W x D x H) (imperial) | 17.5 x 17.75 x 12.1" |
| Storage temperature (T-T) | -40 - 70 deg C |
| Storage relative humidity (H-H) | 15 - 95% |
| Operating temperature (T-T) | 0 - 45 deg C |
| Operating relative humidity (H-H) | 15 - 95% |
| Heat dissipation | 4900 BTU/h |
| Width | 17.5" (444.5 mm) |
| Depth | 17.8" (450.9 mm) |
| Height | 12.1" (307.3 mm) |
| Weight | 45.2 lbs (20.5 kg) |
_1765578782900.webp "Networking")
_1765813942257.webp "Network Security")
_1765815423134.webp "Storage & Backup")
