SKU#: DP14VMM1M
Availability: In Stock
Condition: New
Brand: StarTech.com
Category: Networking
Sub Category: Network Cables
Weight: 0.1301 lb
Standard ground shipping delivery: 5–8 business days.
$11.81
StarTech.com DP14VMM1M is a 3.3 ft (1 m) DisplayPort to DisplayPort cable with male connectors at both ends, supporting resolutions up to 8K 120Hz. It follows DisplayPort 1.4, has aluminum mylar foil shielding, has gold-plated contacts and locks with latching connectors. VESA Certified DisplayPort 1.4 Cable. This cable is VESA Certified to ensure full compliance and efficient operation of the higher link rate of HBR3.
| Cable shielding | Aluminum mylar foil |
|---|---|
| Latching connectors | Yes |
| Number of conductors | 19 |
| Product colour | Black, Gray |
| Cable length | 39.4" (1 m) |
| Connector 1 | DisplayPort |
| Connector 2 | DisplayPort |
| Connector 1 gender | Male |
| Connector 2 gender | Male |
| Connector contacts plating | Gold |
| Jacket material | Thermoplastic elastomer (TPE) |
| AWG wire size | 34 |
| DisplayPort version | 1.4 |
| Bandwidth | 32400 MB/s |
| Maximum resolution | 7680 x 4320 pixels |
| Supported graphics resolutions | 3840 x 2160, 7680 x 4320 |
| HDCP | Yes |
| High Dynamic Range (HDR) supported | Yes |
| Maximum refresh rate | 120 Hz |
| HBR3 support | Yes |
| Connector 1 form factor | Straight |
| Connector 2 form factor | Straight |
| Operating temperature (T-T) | 0 - 50 deg C |
| Storage temperature (T-T) | 0 - 50 deg C |
| Operating relative humidity (H-H) | 0 - 85% |
| Compliance certificates | RoHS |
| Cable diameter | 0.177" (4.5 mm) |
| Weight | 1.98 oz (56 g) |
| Products per master (outer) case | 120 pc(s) |
| Master (outer) case width | 16.4" (416 mm) |
| Master (outer) case length | 13.3" (338 mm) |
| Master (outer) case height | 11" (280 mm) |
_1765578782900.webp "Networking")
_1765813942257.webp "Network Security")
_1765815423134.webp "Storage & Backup")
