SKU#: NLGR-75F-CAT6A-PATCH
Availability: In Stock
Condition: New
Brand: StarTech.com
Category: Networking
Sub Category: Network Cables
Weight: 1.9842 lb
Standard ground shipping delivery: 5–8 business days.
$52.68
StarTech.com NLGR-75F-CAT6A-PATCH is a 75 ft (22.9 m) Cat6a snagless shielded (STP) Ethernet patch cable in gray with RJ-45 male connectors at both ends. It is rated for 10GBase-T (2.5 Gigabit Ethernet, 5 Gigabit Ethernet, 10 Gigabit Ethernet, Fast Ethernet, Gigabit Ethernet), is tested to 500 MHz, uses 27 AWG stranded copper conductors and wears a low smoke zero halogen (LSZH) jacket.
| Product colour | Gray |
|---|---|
| Snagless cable boot | Yes |
| Conductor material | Copper |
| Frequency | 500 MHz |
| AWG wire size | 27 |
| Plug and Play | Yes |
| Cable standard | Cat6a |
| Cable shielding | S/FTP (S-STP) |
| Connector 1 | RJ-45 |
| Connector 2 | RJ-45 |
| Connector contacts plating | Gold |
| Cabling technology | 10GBase-T |
| Data transfer rate | 10000 Mbit/s |
| Jacket material | Low smoke zero halogen (LSZH) |
| Conductor type | Stranded |
| Cable length | 901.6" (22.9 m) |
| Ethernet interface type | 2.5 Gigabit Ethernet, 5 Gigabit Ethernet, 10 Gigabit Ethernet, Fast Ethernet, Gigabit Ethernet |
| Power over Ethernet (PoE) | Yes |
| Cable shape | Round |
| Connector 2 gender | Male |
| Connector 1 gender | Male |
| Connector 2 form factor | Straight |
| Connector 1 form factor | Straight |
| Power over Ethernet (PoE) type supported | PoE++ (4PPoE) |
| Total Power over Ethernet (PoE) budget | 100 W |
| Storage temperature (T-T) | -20 - 60 deg C |
| Operating temperature (T-T) | 0 - 50 deg C |
| Operating relative humidity (H-H) | 0 - 85% |
| Compliance certificates | CE, ETL, RoHS |
| Outer diameter | 0.224" (5.7 mm) |
| Products per master (outer) case | 12 pc(s) |
| Master (outer) case width | 16.9" (430 mm) |
| Master (outer) case length | 16.9" (430 mm) |
| Master (outer) case height | 11.4" (290 mm) |
_1765578782900.webp "Networking")
_1765813942257.webp "Network Security")
_1765815423134.webp "Storage & Backup")
