
SKU#: 10F-DP14-EXTEND-CBL
Availability: In Stock
Condition: New
Brand: StarTech.com
Category: Networking
Sub Category: Network Cables
Weight: 0.5423 lb
Standard ground shipping delivery: 5–8 business days.
$28.99
StarTech.com 10F-DP14-EXTEND-CBL is a 9.8 ft (3 m) DisplayPort to DisplayPort extension cable with a male and a female connector, supporting resolutions up to 8K 144Hz. It follows DisplayPort 1.4, has aluminum mylar foil shielding, has gold-plated contacts and uses 30 AWG conductors. The connector markings enable quick visual identification, distinguishing this cable from other similar-looking or unmarked DisplayPort cables. Eliminate guesswork and always choose the appropriate cable to support full DP 1.4 performance.
| Cable shielding | Aluminum mylar foil |
|---|---|
| Product colour | Black |
| Cable length | 118.1" (3 m) |
| Connector 1 | DisplayPort |
| Connector 2 | DisplayPort |
| Connector 1 gender | Male |
| Connector 2 gender | Female |
| Connector contacts plating | Gold |
| Cable material | Copper |
| Jacket material | Thermoplastic elastomer (TPE) |
| AWG wire size | 30 |
| DisplayPort version | 1.4 |
| Bandwidth | 32400 MB/s |
| Maximum resolution | 7680 x 4320 pixels |
| Supported graphics resolutions | 3840 x 2160, 7680 x 4320 |
| High Dynamic Range (HDR) supported | Yes |
| Maximum refresh rate | 144 Hz |
| Fire-resistance rating | VW-1 |
| Multi-Stream Transport (MST) | Yes |
| Connector 1 form factor | Straight |
| Connector 2 form factor | Straight |
| Operating temperature (T-T) | 0 - 50 deg C |
| Storage temperature (T-T) | -20 - 70 deg C |
| Operating relative humidity (H-H) | 5 - 85% |
| Compliance certificates | CE, RoHS |
| Doesn't contain | Halogen |
| Cable diameter | 0.331" (8.4 mm) |
| Weight | 8.47 oz (240 g) |
| Products per master (outer) case | 40 pc(s) |
| Master (outer) case width | 19.7" (500 mm) |
| Master (outer) case length | 12.6" (320 mm) |
| Master (outer) case height | 8.27" (210 mm) |