SKU#: TS1TMTS430S
Availability: Sold Out
Condition: New
Category: Storage & Backup
Sub Category: Solid State Drives (SSD)
Weight: 0.011 lb
Standard ground shipping delivery: 5–8 business days.
Request a quote
Transcend TS1TMTS430S is a 1 TB SATA III M.2 SSD for laptops. It reads at 560 MB/s and writes at 520 MB/s, has a 6 Gbit/s interface rate, uses 3D NAND flash and is rated for 2000000 h MTBF. Boasting high-quality flash chips, DDR3 DRAM cache, and enhanced firmware algorithms, Transcend's M.2 SSD 430S delivers optimal reliability. When used as a cache, the M.2 SSD 430S provides 1.5 times faster boot time than conventional hard drives.
| SSD capacity | 1 TB |
|---|---|
| Memory type | 3D NAND |
| Windows operating systems supported | Windows 10, Windows 11, Windows 7, Windows 8, Windows 8.1 |
| Linux operating systems supported | Kernel 2.6.31, Kernel 2.6.33, Kernel 3.12, Kernel 3.17, Kernel 3.3, Kernel 4.6.4, Linux Kernel 5.8 |
| Interface | Serial ATA III |
| Component for | Laptop |
| DevSlp (device sleep) support | Yes |
| TBW rating | 560 |
| S.M.A.R.T. support | Yes |
| Read speed | 560 MB/s |
| TRIM support | Yes |
| Write speed | 520 MB/s |
| ECC | Yes |
| Random write (4KB) | 85000 IOPS |
| Random read (4KB) | 85000 IOPS |
| Native Command Queuing (NCQ) | Yes |
| Mean time between failures (MTBF) | 2000000 h |
| Data transfer rate | 6 Gbit/s |
| Certification | CE, FCC, BSMI, KC, RCM, UKCA |
| SSD form factor | M.2 |
| Operating voltage | 3.3 V |
| Width | 0.866" (22 mm) |
| Weight | 0.176 oz (5 g) |
| Height | 0.141" (3.58 mm) |
| Depth | 1.65" (42 mm) |
| Operating temperature (T-T) | 0 - 70 deg C |
| Minimum operating temperature | 0 deg C |
| Maximum operating temperature | 70 deg C |
_1765578782900.webp "Networking")
_1765813942257.webp "Network Security")
_1765815423134.webp "Storage & Backup")
